Tvs Apache RTR 180 Clutch Plates Change | After 50000 kms 😨| Clutch Full Assemply Change|JV

HI AND HELLO FRIENDS TODAY I WILL SHOW TVS APACHE RTR 180 CLUTCH PALTES CHANGE AFTER 50000 KM DONE

WHY TO CHANGE THE CLUTCH PLATES ?

THE PERIOD OF TIME ABOVE 20000 KM ALMOST FULLY DEPRICIATION TOOK WELL WE CHANGE THE CLUTCH PLATES

WATCH FULL VIDEO FOR FULL INFORMATION


HOW TO CHANGE THE CLUTCH PLATES

TVS APACHE RTR 180 CLUTCH PLATES

FOLLOWING THE INSTRUCTION


1. DRAIN OLD OIL ( USING 17 MM SPANNER OR WRENCH )

2. REMOVE KICKER ( USING 12 MM SPANNER )

3. REMOVE CLUTCH CASE AND OIL FILTER ( USING 8 MM SPANNER)

4. REMOVE CLUTCH BOLTS ( USING 10 MM SPANNER OR WRENCH )

5. REMOVE CRANK SHAFT NUT LOCK ( USING SCREW DRIVER )

6. REMOVE CRANK SHAFT NUT ( LEFT THREAD ( RIGHT SIDE LOOSE LEFT SIDE TIGHT )

7. REMOVE CLUTCH PLATE ( LOOK VERY WEAR AND TEAR )

8. AND THE CLUTCH DRIVE WE NEED CHANGE ( OPTIONAL FULLY DEPRICIATION 0

9. FIT THE CLUTCH PLATE ( 1 CARBON PLATE + 1 STEEL PLATE THE FORM )

10. FIT THE CLUTCH PLATE ( FOLLOWING INSTRUCTION ON THE VIDEO )

11. FIT THE CLUTCH BOLTS ( USING 10 MM SPANNER )

12 FIT THE CRANK SHAFT GEAR AND NUT ( FOLLWING VIDEO INFORMATION )

13. FIT THE CLUTCH CSAE

14 FIT THE LUTCH CASE BOLTS ( 10 MM SPANNER )


THANKS FOR WATCHING !!!!!!!!!!!!!!!!!!!!

DONT FORGET TO SUBSCRIBR OUR CHANNEL !!!!!!!!!!!!!!!!!!!!!!!!!!

LIKE AND SHARE VIDEO !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!