EBIKE 36v - Pedal assist removed from controller & motor test with LIPO

Описание к видео EBIKE 36v - Pedal assist removed from controller & motor test with LIPO

This is a video that i should have done about a year ago, But anyway..i finished removing the pedal assist on the controller and removed a bunch of un needed wires from the wiring harness. before i closed up the case i beefed up the shunt with some solder and applied a bead of solder on the mosfet rail to allow more amp flow.

Комментарии

Информация по комментариям в разработке