How to Install Turbulator® Tube™ Bars

Learn how to install Turbulator Tube Bars from Kadant Johson. Turbulator Tube Bars are axial bars held against the inside surface of a dryer and are used to generate turbulence in the rimming layer of condensate.

Installation Instructions: https://bit.ly/3aLreVx

Learn more: https://fluidhandling.kadant.com/en/p...

Chapters
00:00 Introduction
00:21 Step 1 Gather the Kadant Johnson assembly drawing
00:29 Step 2 - Stage the tools required for the bar installation
00:45 Step 3 - Select a staging area for installation
00:58 Step 4 - Check the flat portion width of the dryer shell
1:18 Step 5 - Begin Installation
1:34 Step 6 - Position the first set of bars
2:22 Step 7 - Begin by placing two bars
3:25 Step 8 - Lift the ring segment
4:24 Step 9 - Fully engage the pins
4:33 Step 10 - Set the top ring segment
5:19 Step 11 - Slide the Turbulator tube bars
5:37 Step 12 - Tighten the compression bolts
6:09 Step 14 - Tighten the compression bolts
6:33 Step 15 - Align the next segment of bars

Subscribe Now! https://www.youtube.com/subscription_...

Let's Connect
LinkedIn -   / kadant-inc-  
Instagram -   / kadantinc  
Twitter -   / kadant  
Facebook -   / kadant