Скачать или смотреть What I learned from a total 3D printing disaster

Sometimes a project just doesn’t work out, and this was one of those times. In this video, I walk you through the full postmortem of a 36-hour 3D print that went completely sideways. From failed support structures to filament waste, to tiny design details that never even showed up, this was a disaster from almost every angle. But there’s a lot to learn when things go wrong.

You’ll see how I tried to salvage the print using an ultrasonic cutter, how my slicer settings may have played a role, and why skipping a purge tower might have been a big mistake. I’ll also share what worked (surprisingly, some things did), and give you a look at the tools I used and whether I’d use them again.

Whether you’re new to 3D printing or have dozens of rolls of filament under your belt, there’s something here for you. Learn from my experience so your next print doesn’t end up in the failed-projects bin.

Subscribe for more 3D printing reviews, experiments, and honest looks at what happens behind the scenes when things don’t go as planned.

Want more maker inspiration? Subscribe to the Advanced Geekery Weekly Newsletter for exclusive articles, project updates, and curated reads from across the web: https://news.advancedgeekery.com/

Here are the products I used:

Anycubic Kobra 3: https://geni.us/60K8a
Sunlu 1.75 PLA Gray Matte: https://geni.us/8E9r
Sunlu 1.75 PLA Red Copper Silk+: https://geni.us/P79ghM
Sunlu 1.75 PLA Light Gold Silk+: https://geni.us/R5QRS
DS9 Model: http://www.thingiverse.com/thing:1427052

If you found this video helpful, hit that like button, subscribe for more 3D printing content, and let me know in the comments if you’ve tried this print!

Note: As an Amazon Associate, I earn from qualifying purchases.

#Kobra3Combo #Anycubic #3DPrinting #Budget3DPrinter #MulticolorPrinting #3DPrinterReview #MakerTech #FDMPrinting #TechReview #AnycubicKobra3 #FilamentDryer #QuadColorPrinting #3DPrintFail #TechProjects #PrintQuality