Скачать или смотреть I replaced my rear pinion seal on my f250 and here's what I found 🤯

I decided to this myself because quality work is hard to find these days and the dealership wanted to make and appointment to make an appointment... yeah 🙄.
any I used a sunex 12mm 12 point swivel socket to remove the drive shaft bolts and used a hammer release it from the face of the yolk. I then used a SPC puller to remove the yolk from the pinion and a thin flat head screwdriver to tap out the seal you can use a seal puller just be careful to not mar the sealing surface. to install the new seal I used a bravo 3 inner prop nut wrench which worked perfectly. and I installed the nut to it's original depth and then went slightly past. reinstalled the driveshaft and used blue lock tite on the bolt. TOOLS I USED 👇

Sunex 212ZUMDL Driveline Socket


https://www.sptoolsusa.com/Gear-Pulle...

https://www.amazon.com/Yoursme-Propel...