How to: Front control arms (Ford Mondeo Mk3), lower suspension arms

Removing and replacing the front suspension control arms on my Ford Mondeo (2002). Generally applicable to all FWD vehicles especially Fords.

Related front suspension videos:
Suspension shocks/struts/springs:    • Ford front suspension (shocks, struts...  
Sway bar drop-links:    • How to: Ford suspension drop links (s...  
Steering rack & tie-rods:    • How to: Replace steering rack (Ford M...  

You will need:
Replacement arms and
replacement hardware (ideally), and the locknut for the hydro-bush bolt
1/2" breaker bar with a 12" or 18" extension & various good quality sockets up to 21 mm hex...
...including an 18 mm hex socket (your set might skip this size)
Male torx drive bits with T55 for the pinch bolt and adaptors for ratchets and wrenches
Ratchet handle (convenient)
Hammer & punch
Torque wrench. The 1/2" wrench in the video ~ Amazon US: http://amzn.to/2g1zGoJ | UK: http://amzn.to/2gJ7sAg
Wire brush (drill attachment is nice) and cleaner for any re-used hardware
Thread locker
Axle stands, jack, and secondary mechanical jack to support subframe
Beam (e.g. 2x4 wood) to support subframe

(Using the above Amazon links helps support my channel and is appreciated!)