Replacing a CX9 rear bearing without any control arm removal.

I had to replace the rear bearing in a 2010 Mazda CX-9, but I didn't want to remove the entire assembly to do it. So, I found a way to remove it with a long Torx socket.

There wasn't a lot of room to work behind everything, but at least I didn't have to remove anything more than just the bearing. Most of the bolt removal was accomplished by "feeling" with the long Torx bit, since I couldn't get my head behind there to see anything.

Music credits:
Mountain Sun by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Artist: http://audionautix.com/

Redwood Trail by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Artist: http://audionautix.com/

The 126ers - Going Going Gone