How to Replace Rear Bumper Cover 2003-2007 Honda Accord

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-cJ

This video shows you how to install a new TRQ bumper cover on your 2003-2007 Honda Accord. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!

This repair was done on a 2006 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver https://trq.video/obsI-1AXAA00013
• Pocket Screwdriver
• 10mm Socket https://trq.video/obmJ-1AXAA00017
• Trim Tool Set https://trq.video/oaiy-1AXXX00006
• Push Pin Pliers
• Ratchet https://trq.video/obKB-1AXAA00016
• Gloves https://trq.video/oary-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaeb-1AXAA00068
• Jack Stands https://trq.video/o2F-1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2003-2007 7th Gen:    • Honda Accord 2003-2007 7th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.