Finished Making a NEW D10 Dozer Barrel | Part 3 | Machining & Milling

Our new barrel for a Caterpillar D10 dozer blade lift cylinder is finished! In this part 3 and final video of making the new barrel we show the process of making the new end before fitting and welding it to the new barrel. We start with a solid piece of 4140 round bar and do some heavy turning in the lathe before drilling and boring out the ID. We also machine an internal radius on the inside of the new end. Then it’s over to the milling machine where we drill and tap a couple of bolt holes before turning the head of the mill 24° degrees to drill and bore the grease port. The work on the milling machine is completed with face cutting the step to give clearance for the drop valve. We then fit and weld on the new end to the barrel before giving it some final touches before a new coat of paint to complete the new barrel!

MISSED PART 1 & 2? Watch those videos here:
Part 1 -    • Making a NEW Cylinder Barrel for CAT ...  
Part 2 -    • Using Our New SUNNEN HONING Machine! ...  

In this video we are using:
Hafco TM-26120G Centre Lathe
Hafco TM-1740G Centre Lathe
Hafco BM-63VE Milling Machine
WIA 500i Weldmatic welder

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe

Join our Patreon community:   / cuttingedgeengineering  

Official CEE Merch shop: https://www.ceeshop.com.au

Check out our AMAZON store and explore our favourite finds that we use in the workshop:
https://www.amazon.com/shop/cuttinged...

To see more follow us on online here:
TikTok: https://vt.tiktok.com/ZSdHhtN4h/
Instagram   / cutting_edge_engineering  
Facebook   / cuttingedgeengineeringaustralia  

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

Music: https://www.epidemicsound.com/referra...

#australianmachinist #machineshop #machinist