Скачать или смотреть How to Install a Lathe DRO Kit. Manual Lathe 2 Axis Digital Read Out.

In this video I will show you how I installed a new 2 Axis DRO kit onto my Harrison VS330TR manual lathe. How to install a lathe DRO kit on a lathe is relatively simple. However, there are some intricacies. The Job of the Digital Readout (DRO) is to tell the lathe operator the relative or absolute tool position with respect to either the part or the machine. Using the DRO is much faster than using the hand dials as you don't have to worry about backlash. To install the DRO I first mounted the display; the DRO itself. Then the linier scales. The scales are the parts that measure the positions. There is one for each axis. In the case of this machine the Z axis and the X axis. The lathe axis system is defined using the right hand rule. The X axis is positive towards the lathe operator across the machine. The Z axis is positive away from the chuck down the length of the machine. An easy way to remember it is that if you are moving towards the chuck you are moving in a negative direction.

If you like the videos I make then please consider sharing them with your friends. There is a share button just below the video viewer. It's got loads of options for easy ways to share a link. This REALLY helps the channel to grow and enables me to bring you more videos.

For more information and behind the scenes content be sure to check out my socials

Facebook: www.facebook.com/handmadeextreme
Instagram: www.instagram.com/handmade_extreme

If you would like to make a contribution to the channel then I also have a Patreon page.
www.patreon.com/handmadeextreme

Cheers,

Rob
Handmade Extreme -


Disclaimer: This video is meant for educational and entertainment purposes only. It is in no way meant to be a set of instructions and therefore no attempt should be made by any party to recreate what has been seen or heard in this video. Any attempt to do so is done completely at your own risk.