How to Replace Rear Wheel Bearing & Hub Assemblies 2013-2019 Ford Escape

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com http://1aau.to/ia/1ASHF00595

This video shows you how to install a new wheel hub and bearing on your 2013-2019 Ford Escape. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

Estimated installation time for a professional technician is approximately: 2 hours 0 minutes

This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obQx/1AXAA00013
• 13mm Socket http://1aau.to/ocoh/1AXAA00015
• 19mm Socket
• 32mm Socket http://1aau.to/oeJ/1AAST00003
• Brake Caliper Compressor Tool. Single Piston. Screw Style.
• Brake Caliper Hanger http://1aau.to/ooa/1AXAA00439
• Needle nose pliers http://1aau.to/oKm/1AXAA00051
• Needle nose pliers http://1aau.to/oKm/1AXAA00052
• E14 Socket
• Ratchet http://1aau.to/ocn2/1AXAA00016
• Socket Extensions http://1aau.to/ocoh/1AXAA00015
• Torque Wrench http://1aau.to/obpJ/1AXAA00044
• Gloves http://1aau.to/obv6/1AXSS00048
• Safety Glasses
• 7mm Hex Socket
• Floor Jack http://1aau.to/oaIL/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oau2/1AXAA00065
• Pick http://1aau.to/o9h/1AXAA00037
• Punch
• Wheel Chocks
• Wire Brush http://1aau.to/oAj/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.