How to Replace Heater Blower Motor 2005-2010 Chevrolet Cobalt

Buy Now!
New Heater Blower Motor with Fan Cage from 1AAuto.com http://1aau.to/ic/1AHCX00237

This video to learn how to install one in your 2005-2010 Chevrolet Cobalt. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.

This process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 7mm Socket http://1aau.to/oa/1AXAA00017
• 1/4 Inch Ratchet http://1aau.to/oa/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oa/1AXAA00015
• 3/8 Inch Drill Bit http://1aau.to/oa/1AXAA00092
• Drill
• Gloves http://1aau.to/ob/1AXSS00048
• Safety Glasses http://1aau.to/oa/1AXAA00343
• Razor Blade / Gasket Scraper http://1aau.to/oa/1AXAA00280

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.