Скачать или смотреть AIVA Paper - Laser Waterslide Paper (Clear) - How to use

How to use Water Transfer Paper for Laser Printer.

Step 1: Print Image
Use Laser printer, adjust print settings to high-quality print ("premium glossy paper" or "photo paper"). Maximize your resolution if possible. Let the paper dry for at least 1 minute after printing.

Step 2: Cut Out Image
Cut out the image that you want. Do NOT cut too close to the edge of the image, leave out a 2 ~ 3mm of spacing.

Step 3: Transfer Image
Put the image into the water to separate the base paper and the transfer membrane. After 30-60s, remove the paper from the water then quickly apply it to the target position of the surface, press down firmly to secure the transfer.

Step 4: Remove Air Bubbles and Water
After positioning the paper, use your fingers, a damp cloth/paper towel, or a mini squeegee to remove air bubbles and excess water, then slide the backing off. It should slide easily. Gently pad off any excess water.

Step 5: Baking and Dry
Let the decal sit and dry for at least 3 hours. Ceramics need to be baked in an oven at 230℉(110℃) for 10-15 minutes. Take out the ceramics and let it dry naturally after baking. For the various unresistant high-temperature materials, actually, the baking temperature and time need to be adjusted according to the fact. Here, we must know, the highest temperature should be adjusted by the actual temperature that the transferred object can bear, and can not exceed the specified temperature in the instructions. However, the temperature we use should be in accordance with the actual situation. If you are not sure about the material, just let it dry naturally for 1~3 days or use a hairdryer.

https://www.amzn.com/B0894KSP3P