Скачать или смотреть 🐦 How to build a DIY Bird House 🏡

Hobby Difficulty level: Easy

Chapters:
00:00 In This Video
00:18 Introduction
00:59 Planning
02:00 Equipments required
08:35 Work Started
10:03 Conclusion

1. Buy a redwood fence picket
2. 1:42 Take a screenshot of the plan from video.
3. Follow the plan to make your cuts.
4. You can cut using a handsaw or any power tool, chopsaw or circular saw (if you are comfortable) . Watch safety videos before using any power tools.
5. Decide on the hole size based on what bird you would like to attract. (List below)
6. Verify the cuts by assembling the birdhouse roughly by hand.
7. Drill pilot holes then drive in the Screws.
8. Or use nails and wood glue for assembly.


You will attract the following birds based on the size of the entrance hole
American Kestrel - 3 inches (7.6 cm)
Ash-Throated Flycatcher - 1 1/2 inches (3.8 cm)
Barn Owl - 6 inches (15.2 cm)
Black-Capped Chickadee - 1 1/8 inches (2.85 cm)
Carolina Chickadee - 1 1/8 inches (2.85 cm)
Carolina Wren - 1 1/2 inches (3.8 cm)
Northern Flicker - 2 1/2 inches (6.35 cm)
Prothonotary Warbler - 1 1/8 inches (2.85 cm)
Purple Martin - 2 1/2 inches (6.35 cm)
Tree Swallow - 1 3/8 inches (3.5 cm)
Tufted Titmouse - 1 1/4 inches (3.2 cm)
Violet-Green Swallow - 1 1/2 inches (3.8 cm)
Western Screech-Owl - 3 inches (7.6 cm)
White-Breasted Nuthatch - 1 1/4 inches (3.2 cm)
Wood Duck - 4 inches (10.2 cm)
Downy Woodpecker - 1 1/4 inches (3.2 cm)
Eastern Bluebird - 1 1/2 inches (3.8 cm)
Eastern Screech-Owl - 3 inches (7.6 cm)
House Finch - 2 inches (5.1 cm)
House Wren - 1 1/4 inches (3.2 cm)

Products I used:
A measuring tape.
hand saw
Speed square
Hammer & Nails
Glue
Wood clamps
Forstner bit or hole saw

Optional:
Chop Saw or Circular Saw

❤️ Video made by Hobby & Explorer(Our editor)

Hobby's English Channel:    / @hobby_explorer2  
Instagram:   / hobby_explorer_tamil  
Facebook:   / hobbyexplorer