2011 & up SUPER DUTY Leveling Kit Installation

Be sure to check out my many other SUPER DUTY how-to's

Blocks: https://amzn.to/2KWaZXJ

I wanted to level out the front of my 2011 f250. This is one brand of the numerous coil spring spacers commonly available for less than $75. I followed the manufacturer's step by step instructions and show them here. The total install took me about an hour. I'm not sure if the f350s and 450's would be the same?
Overall I am satisfied with the end results. It did level my truck, however with the 1.5" spacer I only show about 1" of lift as you can see here. The lift in no way noticeably affected my steering or braking. I was able to squeeze a little more brake line slack than what was shown in the video. After the truck was back on the ground I worked on the slack to make sure I had enough. Whenever performing any suspension modifications always use proper torque specs and BE SURE TO GET AN ALIGNMENT UPON COMPLETION! Thanks for watching!

These are the steps that worked for me, I'm not a professional and am in no way claiming to be the authority on suspension mods so follow at your own risk! Always practice proper safety, use the proper tools and use common sense!