Sovol SV06 linear rod, bearing lubricate Step-by-Step guide “Be quiet"

Special Thanks to Adam M and Fred B from sovol FB group for correction: "Z lead screws don't need to lubricate because the SV06 uses POM nuts. It's okay if you do, but make sure you use a lubricant that will not degrade the POM. Also doing this will require you to check for debris/dust building up much more from that point onward. " / "If you really want to lubricate the Z lead screws you can use some dry PTFE lubricant, but please do not put oil or grease on it" .


Hi guys, this video took me couple days to prepare. I have disassembly my sv06 couple of times, just try to get better camera angle and content and stay up all night to editing. But, hey I made it.

I try to avoid remove some of the difficult part to lube inside the bearing. The injection molding parts may not able to take much force. I don't want to risk that. But we can get the most bearing covered. And the end result is awesom. It may take you around 40m to 1h to finish the entire process. So, get a cup of tea, or coffee. It is not easy job.
I hope this video is helpful for you guys to make your sv06 more quieter.

If you have any question, comment, suggestion please leave it on the comment section.
I don't just do review and go for next printer. So if you like my content, please consider subscribe and like the video.

My affiliate:
Link to purchase Sovol SV06: No extra cost on you and I can get some commission.
https://sovol3d.com/products/sovol-sv...


SV06 Review:
   • Sovol SVO6 Review | Budget Prusa i3 m...  

SV06 Beginner tutorial, common issues checking lists:
   • Sovol SV06 Beginner tutorial, Assembl...  

SV06 Bed Leveling guide:
   • Sovol SV06 Bed Leveling Step-by-step ...  

SV06 Dual 5015 upgrade instruction guide:
   • Sovol SV06 Dual 5015 upgrade Instruct...  

SV06 Extruder Gear common issue repair guide:
   • SV06 Extruder Gear common issue, repa...  


Lube that I used:
https://www.amazon.com/dp/B000XBH9HI?...
I don't have amazon affiliate, but it will be easiler for you. Or go big box store to pick up one.


Intro: 0:00
Needed tools 0:21
-Bolts checking list 1:33
Easy way to lube (2 minute) 1:35
Parts animation demo 2:24
Better way to fully lube 3:01
-Bolts/part list 4:25
-Y axis lube 4:51
-Z axis lube 7:57
-X aixs lube 8:40
Z threaded rod/lead screw lube 10:54 don't follow this step
Reassembly adjustment 10:27
Auto Z align bug 11:20
Final noise(dBA) compare after/before 12:03


3d printer lubricate/3d printer lube
___________________________________________________________________________________________________
#3dprinting #3dprinter #3dprint #3dprinted #creality #sovol #biqu #bigtreetech #anycubic #xyzprinting #flashforge #prusa #ender #ender3 #ender3pro #ender3v2 #ender3s1 #diy #diytool #3d打印 #impresion3d #3дпечать #drucken #druck