335i to M3 Conversion, Front - E90 Non-M to E90 M3 Front end conversion - HARD

#BMW #e90m3 #conversion
Making my 335i look like an M3, using (mostly) OEM M3 parts. I say mostly because my fender liners are not OEM.

Originally, I wanted an M3. However, I didn't want the S65, I wanted an N54. I've never actually been a fan of the E90/E91 front end, but I love that they have 4 doors. At the same time, I didn't like how the M3 style body parts looked. I have no regrets. Eventually, I'll get around to doing the rear as well...

Parts numbers for all the parts I used! Bare minimum part number list:
51647900810 - core support
41008042024 - FR Fender
41008042023 - FL Fender
41618043938 - HOOD - Not including emblem, trims, latches (which I used my 335i ones), Hood vent and grills, you get the point.
51768041985 - Driver hood vent
41007891291 - Driver vent grille
51768041987 - Driver vent seal
51768041986 - Passenger hood vent
41007891292 - Passenger vent grille
51768041988 - Passenger vent seal
51148132375 - Hood emblem (mine didn't need grommets)
51118043960 - Euro Spec Front Bumper (no parking sensors or headlight washer) - Not including Grilles and other accessories - you will have to source these separately.
Kidney Grilles were Cross compatible.
51117900764 - Front Bumper lower grille
51748046620 - Passenger side duct - Bumper to fender liner
51747900823 - Driver side duct - mine was used, didn't include bracket
51717899816 - Front Passenger Front Fender Liner
51718044650 - Front Passenger Rear Fender Liner (will need to cut it at the strut tower section if you don't want to remove your suspension)
51717899815 - Front Driver Front Fender Liner
51718044649 - Front Driver Rear Fender Liner (will need to cut it at the strut tower section if you don't want to remove your suspension)
51138046447 - Driver turn signal assembly
51138046448 - Pass Turn signal assembly

ETSY link to N54 badges that don't take 6 months to get here (Like the brazilian ebay ones)
https://www.etsy.com/listing/14469190...