How to Replace Rear Control Arm Bushing 2004-2010 BMW X3

Buy Now!
New Control Arm Bushing from 1AAuto.com http://1aau.to/ia/1ASMX00250

This video shows you how to replace the control arm bushing in your 2004-2010 BMW X3.

This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oa/1AXAA00013
• Pry Bar http://1aau.to/oa/1AXAA00020
• 18mm Wrench
• 16mm Socket http://1aau.to/oa/1AXAA00015
• 17mm Socket http://1aau.to/oa/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• Press
• Pliers
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Drill Bit Set http://1aau.to/oa/1AXAA00141
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Reciprocating Saw
• Wire Brush http://1aau.to/oa/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.