Pioneer RT 909 Demo. - ZCUCKOO

*114 Electrolytic Capacitors have been replaced. Total Re-capping of the Pre-Amplifier Assembly, Mother Assembly, Control B Assembly, Driver Assembly, etc

*NEC Op Amps were removed, 8 pin sockets installed and Burr Brown 2132 Op Amps installed.

*Both Pinch Rollers were Just Rebuilt by Terry's Rubber Rollers and are in Perfect Condition.

*Heads Re-Lapped, Polished, Azimuth Set. All Look like New and work as such.

*Mechanics Completely dis-assembled, Cleaned, and Re-Lubricated with White Electrical Grade Lithium Grease.

*Reel Motors Lubricated with Synthetic Oil.

*Capstan Motor Completely dis-assembled, Commutator cleaned/Polished with 2000 Grit Emery paper, Lubricated with Synthetic Oil and thoroughly tested for Hours. Strong Capstan and brushes look new.

*Brakes Tested, cleaned and work as they were designed, Great Shape.

*Forward and Reverse Play, Rewind and Fast Forward Tensions SET with Gram Scale per Service Manual.

*Capstan Belt Replaced.

*Teflon ball pivots are in place, Cleaned Lubed and in Excellent shape.

*All Pots AND Switches were Cleaned with De-Oxit D5 Cleaner, then after a 24 hour dry, Lubricated with De-Oxit Fader Lube for Clean and Quiet Operation.

*MRL Calibration Tape used on this deck and levels were set for Recording and Playback.

*Speed was set for both 3 3/4 and 7 1/2 ips using same MRL Cal Tape.

*Speed is accurate on this deck.

*Entire Tape Path Cleaned and De-Magnified.

*Heads De-magnified.