HOW-TO INSTALL - ROTTWEILER ENDUROCELL 1.8 FUEL TANK - KTM 890 ADV R (2023)

ENDUROCELL 1.8 (ONLY): https://www.rottweilerperformance.com...
ENDUROCELL 1.8 + INTAKE SYSTEM (COMBO): https://www.rottweilerperformance.com...

The Rottweiler Performance EnduroCell is a creative and stealthy way of adding up to 1.8 gallons (6.8 L) to your 790 or 890 Adventure while still maintaining the use of the stock storage side pods.

The design of the Rottweiler Intake System for the LC8c Adventures is what allows the EnduroCell to work so well. Uniquely engineered the EnduroCell uses up every square millimeter of the available empty space under the seat and mate perfectly to the filter plate of the Rottweiler intake. Additionally the EnduroCell is captured on all four sides merely by the shape of the subframe with no threaded holes to strip or come loose. The subframe perfectly envelopes and holds the EnduroCell like a fitted glove for years of worry free use.

FEATURES:
Additional 1.8 Gal (6.8 Liters).
Only 5 lbs (2.27kg) dry weight.
High quality 1/4 turn RP billet filler cap.
Uses standard OEM KTM fuel valve. Turn it off to keep fuel auxiliary tank full.
Translucent white for quick fuel level checks or stealth black for that OEM look.
All hardware included w/ high quality clear fuel line and check valve.
No backflow. All tanks drain equally.
Gravity feeds into your stock system with no need for heavy auxiliary fuel pumps.

FITMENT:
KTM 790 Adventure R/Rally (2019-2023)
KTM 890 Adventure R/Rally (2020-2023)
Attention S model owners: This tank will work on your bike with a SINGLE piece seat.
Norden owners: This tank will work on your bike with a SINGLE piece seat and some small trimming of the rear fender for the fuel cap under the seat where you cannot see it.
Does not fit with factory alarm system.

CHAPTERS:
0:00 (INTRO)
0:25 (PRODUCT FEATURES)
0:32 (TOOLS FOR THE JOB)
0:37 (BEFORE YOU BEGIN)
0:47 (PART 1 - REMOVE LEFT SIDE PARTS)
1:37 (PART 2 - PREPARE INTAKE FOR REMOVAL)
1:52 (PART 3 - BEGIN SUBFRAME REMOVAL)
2:11 (PART 4 - BEGIN TAIL LIGHT + HARNESS REMOVAL)
2:31 (PART 5 - REMOVE RIGHT SIDE PARTS)
2:46 (PART 6 - BEGIN LICENSE PLATE HOLDER + TAIL LIGHT REMOVAL)
2:56 (PART 7 - REMOVE TEMP SENSOR & BOLTS)
3:11 (PART 8 - REMOVE FUEL LINE & BREATHER HOSE)
3:46 (PART 9 - REMOVE FUSE HOLDER)
3:52 (PART 10 - REMOVE BOOT CLAMPS)
4:06 (PART 11 - REMOVE INTAKE & SPLASH GUARD)
4:30 (PART 12 - ASSEMBLE INTAKE TO ENDUROCELL)
4:55 (PART 13 - PREPARE TO INSTALL ENDUROCELL + INTAKE)
5:55 (PART 14 - TIGHTEN INTAKE BOOT CLAMPS)
6:05 (PART 15 - REINSTALL THE BREATHER HOSE, FUEL LINE & FUSE HOLDER)
6:30 (PART 16 - BEGIN ROUTING THE WIRE HARNESS)
6:49 (PART 17 - BEGIN ROUTING THE SEAT LATCH CABLE & ALARM CONNECTOR)
7:09 (PART 18 - BEGIN BOLTING ON THE SUBFRAME)
7:19 (PART 19 - BEGIN REINSTALLING AIR TEMP SENSOR)
7:29 (PART 20 - DISASSEMBLE REAR TAIL LIGHT ASSEMBLY)
7:39 (PART 21 - ASSEMBLE NEW TAIL LIGHT BRACKET)
7:59 (PART 22 - REINSTALL TAIL LIGHT)
8:23 (PART 23 - REINSTALL LICENSE PLATE BRACKET)
8:34 (PART 24 - RECONNECT TURN SIGNALS & BRAKE LIGHT WIRING)
8:43 (PART 25 - REINSTALL THE SEAT LATCH & PASSENGER PEGS)
8:59 (PLUMBING THE ENDUROCELL 1.8)
9:00 (PART 26 - REMOVE THE SKID PLATE)
9:19 (PART 27 - CLOSE PETCOCKS ON STOCK FUEL TANK)
9:29 (PART 28 - INSTALL & ROUTE FUEL LINE)
10:03 (PART 29 - PREP STOCK FUEL LINES)
10:33 (PART 30 - INSTALL BRASS T-FITTINGS & CHECK VALVE)
11:17 (INSTALLING ENDUROCELL VENT LINE - OPTION 1 & 2)
11:28 (OPTION 1 - PART 1 - VENTING TO ATMOSPHERE)
12:02 (PART 2 - REMOVE THE LOCK COVER)
12:17 (PART 3 - ROUTE THE VENT LINE)
13:02 (OPTION 1 - END)
13:06 (OPTION 2 - PART 1 - TYING INTO THE EMISSIONS SYSTEM)
13:16 (PART 1 - CONFIRM STOCK FUEL TANK VALVES ARE CLOSED)
13:27 (PART 2 - UNPLUG FUEL LEVEL SENDING UNIT & LINES)
13:51 (PART 3 - UNPLUG THE FUEL PUMP CONNECTOR)
13:56 (PART 4 - BEGIN FUEL TANK REMOVAL)
15:01 (PART 5 - BEGIN ROUTING THE VENT LINE)
15:15 (PART 6 - REMOVE BATTERY TRAY)
15:25 (PART 7 - ROUTE VENT LINE TO FRONT OF BIKE)
16:01 (PART 8 - INSTALL BRASS FITTING)
16:20 (PART 9 - REINSTALL FUEL TANK & CONNECT VENT LINES)
16:55 (PART 10 - REINSTALL FUEL LINES & PLUGS)
17:10 (PART 11 - RECONNECT FUEL LEVEL SENDING UNIT)
17:18 (OPTION 2 - END)
17:19 (FINAL INSPECTION)
17:31 (REINSTALL ALL REMAINING PARTS)
17:35 (OPERATING THE FUEL CAP)
17:44 (OUTRO)
17:48 (NEXT CLIP)