Скачать или смотреть 💎 How To Run Automatic Scan ON GoTv Decoder For New Channels | Pbteck

How To Run Automatic Scan ON GoTv Decoder For New Channels

To run an *automatic scan* on your GOTV decoder for new channels, follow these simple steps:

Steps to Run Automatic Scan on GOTV Decoder:
1. **Turn on the Decoder and TV**: Ensure your GOTV decoder is powered on and connected to your TV.
2. *Press the “Menu” Button**: On your GOTV remote control, press the **“Menu”* button to access the main menu.
3. **Navigate to “Advanced Options” or “Settings”**:
Use the arrow keys on your remote to scroll through the menu options.
Select *“Advanced Options”* or *“Settings”* (depending on your decoder model).
4. **Select “Installation” or “Auto Scan”**:
In the settings menu, look for *“Installation”* or **“Channel Search”**.
Select *“Auto Scan”* or **“Automatic Scan”**.
5. **Start the Scan**:
The decoder will begin scanning for new channels automatically.
This process can take a few minutes, so be patient as it searches for all available channels.
6. **Save Channels**: Once the scan is complete, your decoder will automatically save the newly found channels.

After the Scan:
You should now have access to any newly available channels.
If the scan did not pick up some channels, you can try scanning again or check your antenna alignment to ensure it's properly set up for receiving signals.




__________________________________
LINKS


WEBSITE:

https://www.pbteck.com






INSTAGRAM;


  / pbtecknology  


FACEBOOK;


  / pbtecknology  


TWITTER


  / pbtecknology  







TELEGRAM:


https://t.me/pbtecknology








#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire