Скачать или смотреть Simple LED with Push Button Switch

In this tutorial, we will explore how to utilize a push button to control an LED. The push-button circuit consists of a switch,resistor and an LED. When the push-button is pressed, the circuit is completed and the LED lights up.

When the push-button is released, the circuit is broken and the LED turns off. This type of circuit is used to control simple devices like LEDs and motors.

The following hardware components are needed to construct a Push Button Circuit:
1. Push Button
2. LED
3. Resistor 330 or 470 Ohm
4. 9V Battery with Clip
5. Breadboard
6. Jumper Wires (If required)


Working Explanation of push-button

A push-button is a type of circuit that operates on a simple mechanism, known as "push to make." In its default, "off" state, the push-button is also known as a normally open state. When the button is pressed, it creates a circuit and allows the current to pass through. Push-buttons are usually made of plastic or metal and have four legs.


➖➖➖➖

⚠️ WARNING: This video is for demonstration and educational purpose only. Some ideas And Experiment can be risky & Dangerous Must be fully understood before attempting. Even those videos are completed with all safety measures in place. This should only be done by professionals.

➖➖➖➖


#electronics
#breadboard
#scienceexperiment
#project
#electroniccircuit

Astable Multivibrator Dancing LED Using with Transister