How To Change Rim Brake Pads On A Bike

This video shows you how to change the brake pads on a bike. If your bicycle has worn out rim brake pads and you need to replace them, it’s an easy job to do. This video shows you exactly how to replace the brake pads on a bicycle with rim brakes. I also show you how to adjust the brakes once they are installed so that you can stop properly. And to replace the rim brakes on a bicycle, first, loosen up the tension on the brake cable, and then remove the brake cable from the calipers so that you can open them up and get the old brake pads out. You can use an Allen wrench to remove the brake pads from your bike, and then, when you install new ones, make sure that you have the correct washers on the inside and outside of the caliper. You’ll need to adjust the spring tension on both sides of the caliper so that the brake pads are centered and they are safely away from the wheel with the brake pad is not being pulled. You can fine-tune the adjustment at the handlebar using the screw and lock that breaks cable tension adjuster. Following the steps, you can easily replace and install new brake pads on your bicycle all by yourself.