DIY Rod Building: Wrapping And Finish Motor Setup

Here is a DIY solution for adding a power wrapping (whipping) and finish application motor to a hand wrapping jig. I built this one to work with the rod wrapping jigs I sell, but the basic ideas could be adapted to work with a wide range of hand wrapping jigs. Most rod hobby rod builders can get by without a power wrapping/finish motor, but it is a nice thing to have...especially if you have to do a lot of long underwraps. It is also a little easier to get a bubble free epoxy finish using a power finish motor in my opinion.
If there is some demand for me to make these available to purchase, I would definitely consider doing that...just let me know if you would be interested in possibly purchasing one in the comments below.
Here are some parts similar to what I used (these are NOT affiliate links, I do not get paid for recommending these items):
Motor Bracket: https://www.amazon.com/gp/product/B06...
Motor: https://www.amazon.com/gp/product/B07...
Speed Controller: https://www.amazon.com/gp/product/B00...
And you will also need a power supply something like this to power the speed controller/motor: https://www.amazon.com/VENTECH-Adapte...
#thefishinghobby #rodbuilding #guidewraps

All of my links (my store/social media/email information) are here: https://linkpop.com/5286af