HP Pavilion Laptop 15-eg0xxx Disassembly to access RAM and SSD. 11th Gen Intel(R) Core(TM) i5-1135G7

HP Pavilion Laptop 15-eg0xxx Disassembly to access RAM and SSD. 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz

Timestamp
0:00 Intro
00:00:31 1st step
00:00:44 2nd step
00:01:00 3rd step

For more detailed steps please check my blog - https://rb.gy/hupopt
feel free to comment if you have any specific question.

search terms:
teardown
replace
hp
HP Pavilion Laptop
HP Pavilion Laptop 15-eg0xxx Disassembly
HP Pavilion Laptop Disassembly
11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz
11th Gen Intel(R) Core(TM) i5-1135G7
11th Gen Intel Core
i5-1135G7
how to
how to disassemble hp laptop
HP pavilion 15-eg0xxx series Disassembly
How to disassemble 15-eg0xxx series HP laptop
what is inside of HP pavilion 15-eg series laptop
2021 Hp laptop teardown


Introduction
This should apply to many similar HP Pavilion laptops of similar age.
There are very few little tricks to opening this to access the RAM slots and SSD.

Step 1: HP Pavilion Laptop 15-eg0xxx Disassembly to access RAM and SSD.
• At first, start by turning off the laptop properly, then disconnect the power cord.
• There are only two screws visible on the bottom indicated by the green circles, both are of the same size and length, remove them.
• There are four screws hidden under rubber stickers/paddings, indicated by the orange circles, remove the stickers and the screws underneath.
Step 2:
• Using a guitar pick, release the plastic retaining clips that hold the bottom of the case on.
• The bottom cover should now be free.
Step 3:
• Before doing anything you should remove the Li-ion battery first. Which has 8 screws in its plastic frame to attach it to the laptop’s body. (indicated by red rectangle 1)
• Now it is safe and the SSD and RAM are accessible. (Indicated by green rectangle 3,4)
• To remove the RAM release the hinge clips from both ends. (Indicated by green rectangle 3)
• To remove the SSD from its mount remove the screw from the end. (Indicated by green rectangle 4)
• In addition to those you can access wifi module as well. (Indicated by the green rectangle 5)
Step 4
• When reassembling, keep the unit upside down and put the battery back into place first after all the required replacements are done.

• Put the back cover in its place.
• Turn on the computer before replacing the screws.
• At first it might take some time to start as their no CMOS battery other than the main one, it might restart once.
• If everything is ok then, to reassemble your device, follow these instructions in reverse order.