ArcDroid: THC Part 2 - Making Divided Voltage PCB and Updated Info

Final design and build of my adjustable divided voltage box for the ArcDroid Torch Height Compensation. Some CNC Router and CNC plasma action throughout. A real time full length cut at the end.

If you've found this information useful and would like to contribute, now you can at https://www.buymeacoffee.com/ampmechanic

0:00 Stepper motor problems on my CNC router
1:40 Cutting the Voltage divider PCB and talking about what caused the problem with the THC and why 100:1 works.
4:00 The possible solution that is built in
5:15 Why I opted for an adjustable divided voltage board
8:30 The finished box and wiring harness
10:01 Hooking it all up and testing with numbers
15:17 My settings and results thus far. Actual numbers.
16:20 Testing those settings on a long and complex cut. This is a long one in real time.