OBD module in the KME NEVO-SKY 5.0.7.5 program, part 3

In this material, you will learn about the further capabilities of the OBD module of the KME NEVO-SKY family of controllers, the Current readings tab - keyboard shortcut Shft+F1.

Advanced gas controllers from the KME NEVO-SKY family have a built-in OBD module. These are the following types of gas controllers:
NEVO-SKY DIRECT
NEVO-SKY MAX
NEVO-SKY JET OBD MINI
NEVO-SKY JET OBD
NEVO-SKY JET EXPERT

These controllers enable communication with the petrol controller using the OBDII (On-Board Diagnostics) diagnostic interface.

Remember!!! In cars with a flap on the OBD connector (a flap with electrical connections), remove the flap before soldering the OBD module wires.

In today's video, we will discuss the individual sections in the tab
- Corrections
- Fuel system operating mode section
- Catalyst temperature
- General
- Oxygen sensors
- Fuel pressure
- Other

In some cars, some parameters may be unavailable for reading using standard methods. In NEVO-SKY controllers, we are constantly expanding the possibilities of reading data from OBD, so as to provide the user with information that was not available before.
Remember!!! In some cases, the data read from the OBD may be incorrect or may contain unreal values. Always verify the accuracy of the readings.