2007 Dodge Charger Front Brake Pads Rotors Install Removal Replacement 06-10 models

My New video with torque specs here:    • How to replace Brakes & Rotors on a 2...  
Hi Everyone. Quick video to show you how to completely replace the front rotors and brake pads on your 06-10 Dodge Charger. Main goal of this video is to show you how simple it is, and that almost anyone can do it and save serious $$. This is my first time doing it and took me about an hour for all 4 wheels, on a hot day. I tried to make the video as detailed as possible for first timers. I think the same process goes for the Dodge Magnums and probably most other cars. This is based on the SXT charger. The SRT will be different due to the advanced breaking system. I’ll be posting the Rear rotor/break install as well, so check that out. Hope this videos is helpful and saves you a lot of $$$. Here is hte link to the do REAR:    • 2007 Dodge Charger REAR Brake Pads Ro...  

Mentioned in the video but quick breakdown of what you’ll need:

-New rotors/brake pads. (got my complete set on ebay for $130 shipped - vented rotors in the front, non-vented in the back)
-Ratchet socket wrench
-13mm socket
-18mm socket
-hammer / rubber mallet
-flat head screwdriver
-pliers (for thread clip removal if you have them)
-nylon brush (to clean off the rust, etc)
zip tie / wire to hang the caliper up during install

** Update which i forgot here. Remember to re-grease your slider pins and use anti-seize and use new clip if possible.
Also i recommend using "Disc Brake Quiet" by CRC or others, to put on back of the pads, to eliminate that a squeaking noise caused by vibration and dust. Did this on a Camry recently and its perfect..

Thanks,
Lech
www.HikePro.net