Скачать или смотреть Jump Drum Operation on wire drawing machine to Mexico

Straight Wire Drawing Machine with Cassette to Mexico

Sales Manager: Cathy
Email: [email protected]
WhatsApp/WeChat: +86 18032235153
Web: www.dapu-machine.com

1. Definition
In wire drawing production, "jumping drum production" refers to a process in which, under certain process requirements, the steel wire does not pass through all the continuous wire drawing drums (tanks), but intentionally skips one or more drums and directly enters the subsequent drum or wire-taking device for wire drawing.

2. Why skip drums?
Adjust the finished wire diameter
Skipping some drums drum reduce the number of wire drawing times, which is suitable for occasions where too fine wire diameter is not required.
Improve production efficiency
Skipping some wire drawing steps drum shorten the production process and increase output.
Save molds and energy consumption
Reduce the number of mold uses, extend the mold life, and reduce power consumption and lubricant consumption.
Temporary replacement or maintenance
When a tank or mold fails, skipping drums drum maintain production continuity.

3. Applicable occasions
Large wire diameter products: such as thick steel wire for steel bars and welded mesh, which do not require too fine or high precision;
Intermediate process: only need to pull the wire to the middle specification, and then anneal or fine drawing;
Temporary solution for equipment or mold maintenance

IV. Precautions
Adjust the speed and tension of the retracting and releasing wires to prevent wire breakage and tangled wires;
Regularly check the wear of the mold and drum to avoid surface scratches caused by drum jumping.
#drawingmachine #drawingdrum #straightwiredrawingmachine