How To Replace Front Upper Ball Joint 2005-15 Nissan Xterra

Описание к видео How To Replace Front Upper Ball Joint 2005-15 Nissan Xterra

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00309
New Ball Joint Set from 1AAuto.com http://1aau.to/ia/1ASFK03330

Modern suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how. This video shows you how to install new, quality TRQ ball joints on your 2005-15 Nissan Xterra.

• Check here for more videos on the 2005-2015 Nissan Xterra:    • Nissan Xterra 2005-2015 2nd Generation  

This repair was done on a 2005 Nissan Xterra Off-Road 4.0L and the process should be similar on the following vehicles:
2005 Nissan Xterra
2006 Nissan Xterra
2007 Nissan Xterra
2008 Nissan Xterra
2009 Nissan Xterra
2010 Nissan Xterra
2011 Nissan Xterra
2012 Nissan Xterra
2013 Nissan Xterra
2014 Nissan Xterra
2015 Nissan Xterra

Tools you will need:
• 21mm Socket
• 22mm Socket http://1aau.to/oe8/1AXAA00266
• Pickle Fork
• Trim Tool Set http://1aau.to/oyg/1AXXX00006
• Side Cutters
• Snap Ring Pliers
• Ratchet http://1aau.to/oaiQ/1AXAA00016
• Torque Wrench http://1aau.to/oMf/1AXAA00044
• Hammer
• Large C-Clamp

Subscribe:    / @trq  

Check out our playlist:
Nissan Xterra 2005-2015 2nd Generation:    • Nissan Xterra 2005-2015 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке