Скачать или смотреть gravity separator jig machine from China

Our Saw-tooth Wave Jig Machine is a new
type of energy saving and high efficient
gravity separation equipment and developed
based on the traditional Sine Wave Jig
Machine. The difference between Saw-tooth
Wave Ladder Jig and Sine Wave Jig is that
the pulsation curve for jigging is saw-tooth
wave shape, with speedy upward flow and
slow downward flow. Bed layer is elevated
integrally and slowly dropped with a long
effective loose time, allowing significant
increase of handling capacity for unit screen
surface, decrease of lower limit of grain size
recovery and large save of make-up water for
undersize fraction.
I ndustrial tests carried our of Saw-tooth
Wave Jig and Sine Wave Jig for comparison
showed that the recovery rate for operation of
Saw-tooth Wave Jig is raised by Sn:3.01%,
W:5.5%, Pb:1.63%, Zn:2.04%; The water
consumption reduces 30%-40% than
traditional Jig. The area reduces 1/3 and the
stroke may adjust also.

Feature
� High capacity
� High concentration ratio and high
recovery
� Fabricated with highest quality
material
� Easy to install, operate and maintain
� The pulsation curve is saw-tooth wave
shape facilitate heavy mineral to
settling
� Saving water 30-40% than ordinary jig
� The pulsation speed very easy adjusted
by regulator
� Suitable for roughing and cleaning
� Can achieve a good result in processing
such as placer gold, tungsten,iron, tin,
hematite, copper, tantalum-niobium,
titanium, manganese, barite, zirconium,
chrome and gemstone etc.
Thanks for your attention.i am Mily from China Jiangxi Well-tech international mining equipment. for more details, please contact me,my Cell/WhatsApp +86 183 7987 3189.
e-mail:[email protected].