Important MML Commands of Huawei BBU | Huawei BBU

Important MML Command of Huawei BBU
Huawei BBU
Adnan Farooq

The discussion of the MML command in this video as,
DSP RRU
Use this command to display all RRUs
DSP RRUCHAIN
Use this command to display the RRU chain
LST CELL
Use this command to show the list of cell
DSP BRD
To display all boards installed on chassis including RRU and their location
DSP BRDMFRINFO
For detail of board SN and type etc.
DSP RRUCHAINPHYTOPO
Use this command to display all RRUs serial number
LST SECTOR
Use this command to show sector configuration
LST SECTOREQM
Use this command to show cell sector equipment ID by the corresponding subrack
DSP BRDTEMP
Use this command to display the board temperature
RST BRD
Use this command to reset the specific board
RST BRDPWROFF
Use this command to power off a board. Then the board is powered on automatically and reset.
DSP VSWR
Use this command to display VSWR
DSP TMA
Use this command to display installed TMA
DSP RET
Use this command to display RET
DSP RETPORT
Use this command to display RETPORT status
LST ANTENNAPORT
Use this command to show antenna ports connected to subrack
SCN ALD
Use this command to show antenna line devices.
LST RET
Use this command to show RETs
LST RETPORT
Use this command to show RETPORTs
LST IPRT
Use this command to query all reachable IP routes.
LST VER
Use this command to show a list of software versions available
LST SOFTWARE
Use this command to show a list of software available
LST VLANMAP
Use this command to list parameters of next-hop VLAN mapping relationship
LST DEVIP
Use this command to display device IP addresses
DSP OMCH
Use this command to display OM channel details.
DSP RXBRANCH
Use this command to display dynamic attributes of the RX channel of RRU or RFU