Shop Talk | Ep. 4 | The Evolution of Software in the HVAC Duct and Fittings Fabrication Industry

Welcome to Shop Talk with Mestek Machinery — where we discuss the topics that matter most to the fabrication shops, contractors, and anyone else in the HVAC duct and fittings fabrication industry as you look for ways to improve your operations.

In this episode, John Welty is joined by Mike Bailey and David Daw — two gentlemen with over a combined 80 years in the industry (icons of the industry you might say) — and the discussion focuses on the software that’s used in today’s HVAC duct and fittings fabrication industry and, in particular, the data exchange for BIM modeling and how it’s evolved to be the standard of the industry today. As you'll see in the conversation, a lot has happened from the beginnings with Computer-Aided Manufacturing (CAM) to Computer-Aided Drafting/Design (CAD) to where we are today. We hope that by discussing this evolution and how today's software benefits so many facets of the industry, it can help you as you begin to evaluate what’s right for your operation. And don’t forget, we’re always here to help — even as you begin your evaluation. Please don’t hesitate to reach out for a consultation — the best place to do so is on our website at the link below — we simply want to understand what you’re looking to do and see how we can help you achieve your objectives (and there’s absolutely no obligation).

Shop Talk with Mestek Machinery Home | Watch the video, listen to the podcast, read the transcript: https://mestekmachinery.com/shop-talk...

Request a 1-on-1 Consultation with a Mestek Machinery Technical Specialist: https://mestekmachinery.com/request-1...


USA: 319-364-9181
International: 216-360-7676
Europe: +41-26-400-07-70
Asia: +86-10-8975-8065