High Speed Co Extrusion Coating and Laminating Machine WCL-H-1300 (300 m/min) | WORLDLY

INQUIRY & MORE INFO: https://bit.ly/3l3jOA2
High Speed Co Extrusion Coating and Laminating Machine WCL-H-1300 (300 m/min) | WORLDLY
In this fast-changing packaging market the multi-layer laminates demand has increased. The Co-extrusion machine allows to use two kinds of resin or more by two or more extrusion units to create multi-function extrusion layers.

The variety of resin after melted and go through the feed block then join into the T-die. The side screw has corrosion resistance treatment. It’s fine to work with acid copolymer resin, such as EVA, EAA, EMAA, and Surlyn, etc. The barrel heated by a ceramic heater to ensure more energy-saving and short start up time.

Worldly also developed the exclusive extrusion output control system with Germany leading dosing system company. So it provides the very accurate and stable output and coating gauge control during the production. It can save more material especially for the long run jobs.

The high-speed H series version of the rewinding splicer adopted with a tracking roller device. It provides two kinds of gap & contact winding mode and gives a uniform and perfectly straight finished winding during high speed running. Also the taper tension can properly control the winding from the beginning roll. So it can reduce the wastage and avoid the wrinkle generate at the inner roll.


Worldly utilizes only high quality imported T-dies and maintains a ±3% thickness variation.
The inner deckle system is customized in-house to reduce trim and provides uniform high-speed production.

#CoExtrusionCoating #CoExtrusionLaminating #WORLDLY #PRMTAIWAN #LaminatingMachine #LaminationMachines #CoatingMachine #Plastics #Rubber #B2Bplatform #B2B #PRM #Plastics #Rubber #B2BPlatform #HighSpeed