How to Replace Parking Brake Cable 1999-2007 GMC Sierra

Buy Now!
New Parking Brake Cable from 1AAuto.com https://trq.video/ia-DMBRC00001

A rusty, seized, or snapped parking brake cable leaves your car or truck in an unsafe state, especially if you need to park on a hill, or jack up the front in an emergency. This video shows you how to install a new parking brake cable on your 1999-2007 GMC Sierra.

• Check here for more videos on the 1999 to 2007 GMC Sierra 1500.    • GMC Sierra 1999-2007 2nd Generation  

This repair was done on a 2004 GMC Sierra 1500 SLT 5.3L Extended Cab Pickup 4-Door and the process should be similar on the following vehicles:
1999 GMC Sierra 1500
2000 GMC Sierra 1500
2001 GMC Sierra 1500
2002 GMC Sierra 1500
2003 GMC Sierra 1500
2004 GMC Sierra 1500
2005 GMC Sierra 1500
2006 GMC Sierra 1500

Tools you will need:
• Pry Bar https://trq.video/osH-1AXAA00020
• 13mm Socket https://trq.video/oaa2-1AXAA00015
• Cutoff Wheel
• Locking Pliers https://trq.video/oef-1AXAA00139
• Side Cutters
• Ratchet https://trq.video/oahy-1AXAA00016
• Pick https://trq.video/opM-1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
GMC Sierra 1999-2007 2nd Generation:    • GMC Sierra 1999-2007 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.