Ecodiesel turbo coolant line leak, and intake manifold removal overview

Likes and subscribes are very appreciated!
Dorman PN for turbo coolant line is 667-562

One thing I did not mention! The socket cap torx bolts that hold down the fuel rail is tricky to remove. I used a T40 torx bit from a 1/4” driver set. I then used a long 1/4” wrench on that small bit. I replaced those hold down bolts with normal hex head bolts. I believe it was M8x20mm. Might be smart to have this tool on hand for removing the fuel rail torx head bolts - https://amzn.to/3RSYRvm

If you want to try and just replace the ruptured rubber line you could. It would definitely save you the aggravation of dealing with the banjo fitting on the turbo and the expense of the dorman replacement! For what it’s worth, it’s 2.75” long and 3/8” ID. Use good quality hose and ideally fuel injection style hose clamps. Put an emphasis on quality here.