Citizen Watch Setting Instruction — H610

Описание к видео Citizen Watch Setting Instruction — H610

Setting instructions for the Citizen H610.

Main Sections
Setting the Time and Calendar 00:00
On-Demand Reception 03:22
Checking Charge Level and Radio Reception Results 05:21
Changing Time Zones 06:56
Automatic Radio Reception 08:12
All Reset and Zero Positioning 09:42

Sections With Timing
Setting the Time and Calendar 00:00
Introduction 00:03
Pull Crown out One Click -- Chronograph Second Hand Moves 00:20
Rotate Crown -- Select City 00:28
Press/Release Lower Right Button -- Set DST On/Off 00:34
Press/Release Upper Right Button -- Chronograph Hand Moves 01:01
Pull Crown out one Additional Click -- Activate Time/Cal Setting 01:14
Rotate Crown Either Direction -- Set Minute 01:31
Press/Release Upper Right Button -- Activate Hour /24-Hour Hands 01:36
Rotate Crown Either Direction -- Set Hour/24-Hour Hands 01:42
Press/Release Upper Right Button -- Activate Date of Month Setting 02:09
Rotate Crown Either Direction -- Set Current Date 02:24
Press/Release Upper Right Button -- Activate Month/Leap Year Set 02:38
Rotate Crown Clockwise -- Set Month/Leap Year 02:50
Understand Leap Year Setting 02:57
Push Crown in Two Clicks -- Finalize Time and Calendar Setting 03:13

On-Demand Reception 03:22
About Radio Reception at Change of location 03:25
Ensure Current Location Chosen in City Window 03:53
If Current Location Not Shown, Pull Crown out One Click/Rotate 03:58
Push Crown in One Click 04:05
Press/Hold Lower Right Button 2 Seconds -- Enter On-Demand 04:13
Release Button -- Start On Demand Radio Reception 04:26
Takes up to 15-Minutes To Complete Reception 04:34
Signal Received - Second Hand Moves-Indicates Reception Strength 04:38
No Signal Received or Updating failed -- Beep Tone Sounds 04:54
Normal Operation Resumes 05:16

Checking Charge Level and Radio Reception Results 05:21
Press/Release Lower Right button 05:25
Chronograph Minute Hand 10:00 Sub Dial Indicates Power Reserve 05:34
Chronograph Second Hand Rotates indication Last Reception Results 05:40
True Second Hand (6:00 sub dal) rotates to indicate Signal Station 05:45
If Last Reception Failed -- Chronograph Hand Rotates to "no" 06:00
If Last Reception Successful -- Chrono Hand Rotates to Signal Strength 06:13
Press/Release Lower Right Button -- Exit Check Function 06:31

Changing Time Zones 06:56
About Radio Reception and Time Zone 06:59
Pull Crown Out One Click -- Rotate Crown to Select City 07:25
Press/Release Lower Right Button -- Set DST On/Off 07:34
About Daylight Saving Time Setting 07:41
Push Crown in One Click -- Finalize Setting 08:03

Automatic Radio Reception 08:12
About Radio Reception 08:15
After a Complete Loss of Charge 08:34
No GPS Feature -- Must Manually Change City with Time Zone Change 08:54
Radio Reception Based On Time Zone in City Window 09:05
Times for Automatic Reception to Occur 09:20

All Reset and Zero Positioning 09:42
About the Need for All Reset and Zero Positioning 09:45
Begin All Reset Procedure -- Pull Crown Out One Click 09:57
Rotate Crown - Move City Indication to UTC 10:03
Pull Crown Out One Additional Click -- Enter Time Setting Mode 10:09
Press/Hold both Right Buttons 2-3 seconds -- All Reset Occurs 10:22
Push Crown in Two Clicks -- Finalize All Reset-Continue Zero Position 10:37
Press/Hold Upper Right Button 10 seconds -- Engage Zero Mode 10:47
Pull Crown Out Two Clicks -- Hands Move 11:09
Press/Release Upper Right Button -- Activate Hour/24-Hour Setting 11:20
Rotate Crown Clockwise -- Move Hour.24-hour Straight Up 11:28
Press/Release Upper Right Button -- Activate Minute/Second Hand 11:45
Rotate Crown Clockwise -- Set Minute & Second hands to 12:00 11:56
Press/Release Upper Right Button -- Activate Chrono Second Hand 12:14
Rotate Crown -- Set Chronograph Second Hand to 12:00 12:23
Press/Release Upper Right Button -- Activate Date Setting 12:32
Rotate Crown -- Change Date to 31/1 -- 10:00 Sub Hand to 60 12:45
Push Crown in Two Clicks -- Finalize Setting 13:03
Press/Release Upper Right Button -- Exit Zero Position Mode 13:10
All Reset/Zero Position Complete -- Must now set time/calendar 13:28

Комментарии

Информация по комментариям в разработке