How to Replace Water Pump 2012-2020 Ford Focus

Buy Now!
New Engine Water Pump from 1AAuto.com http://1aau.to/ic/1AEWP00091

This video shows you how to install a water pump in your 2012-2020 Ford Focus. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.

This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• 10mm Wrench http://1aau.to/oa/1AXAA00010
• 13mm Wrench http://1aau.to/oa/1AXAA00010
• 15mm Socket http://1aau.to/oa/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 8mm Socket http://1aau.to/oa/1AXAA00017
• Coolant Funnel Set http://1aau.to/oa/1AXAA00116
• 1/4 Inch Ratchet http://1aau.to/oa/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oa/1AXAA00015
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Block of Wood
• Brake Parts Cleaner
• Floor Jack http://1aau.to/oa/1AXAA00068
• Rubber Mallet http://1aau.to/oa/1AXAA00413

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.