Motorized Bicycle Build Part 4 ("NO SLIP" Hub & Sprocket)

Yd100 2 Stroke Motorized Bicycle Build!
Update: 03/23/21! So I have been using this Exclusively! With a 56tooth sprocket! The Teeth one the 56 tooth Sprocket are now gone! lol! The sprocket is at the end of it's life and the hub is still in the same spot where I placed it 500 Trail rides ago lol!

Update:1/5/21 Over 100 miles now on that Hub adaptor and its holding perfectly still!

Update: 12/15/20 The new 56 tooth sprocket came in. 100% no wobble like the first had slightly. Either a stamping or shipping issue that damaged the first one before I got it. They say its common on larger sprockets like this that are not cnc.

Update: 12/24/20 I ended up going with a 48tooth sprocket. It was just to hard to start with a 56tooth sprocket. But we got over 55 miles on the 56 tooth and 250 miles now on the 44tooth and the hub is still rock solid And has not slipped! move videos coming shortly!

I went with a large 56 tooth sprocket. The hub was made by CHD and was very nice. I bought a multi point Sprocket by CHD as well. For the size and such the sprocket I received had a minor wobble to it later off camera when I looked into this more. I think either in shipping or when they stamped this sprocket it gave it a slight imperfection of staying perfectly flat. Either way this sprocket should work and is within limits of use by a lot still. For its size its not uncommon I'm told!