Скачать или смотреть I Made a 3D Printed Instax Camera!

I made a (mostly) 3D printed Instax Camera, and you can too!

The Jankstax One is a 3D printed camera, with a printed shutter and diaphragm, which interfaces with the Jollylook Instant Mini Film Development Unit, to make a fully DIY Instax mini camera!

All the 3d print files can be found here: https://www.thingiverse.com/thing:698...

The non-printed parts needed are:

Jollylook Instant Mini Film Development Unit (https://jollylook.com/products/jollyl...)
1 - 100mm focal length, 40mm Diameter, 6mm height lens (https://www.amazon.com/dp/B0C3B8DSBX)
4 - M3 x 30 screws, 1 - M3 x 8 screw, 2 - M2 x 20 screws, and 2 - M2 x 8 screws
1 - 120 degree, 4.5mm Diameter, 30mm length spring (https://www.amazon.com/dp/B09NQGR6QG)
1 - .3 x 4 x 15mm 9 lap compression spring (https://www.amazon.com/dp/B0BVTDP29W)

----
0:00 - Intro
0:20 - Folding Cameras
1:15 - Change in plans
2:00 - Cameras
2:37 - Disassembly
4:00 - Parts
4:20 - Improvements
4:50 - Ending