Toyota Hilux /Vigo rear axle bearing replacement | Complete guide how to (Non-ABS type)

How to replace N70 Kun26 2005-2015 Toyota Hilux rear wheel bearings and reseal to fix leaks

A complete how to guide on disassembly and assembly including puller tooling used to press the bearing and collar off the shaft, if you do not have a press you can cut the collar and knock the shaft and bearing away from the backing plate.

This is for non-abs if you have ABS you will need to fit the ring and a second collar, the measurement depth you install the collar and ring is important and should be measured on disassembly to ensure it goes back in the same place (122.2 mm from the face of the wheel mounting hub to the top of the second collar)

Includes how to adjust the rear brake shoes and fit the hand brake cable back on the brake shoes

Intro 00:00
Disassembly of Hilux brake and axle 00:30
Toyota Hilux rear axle bearing removal 04:30
Fitment and assembly of Toyota Hilux axle bearing and seals 09:12
Toyota Hilux rear brake and parking brake cable adjustment and assembly 15:45
Conclusion 22:22