Скачать или смотреть How to Reload String Trimmer Line FAST | WeedEater Restring Tutorial

#StringTrimmer #WeedEater #LawnCare #DIYLawnCare #TrimmerLine #YardWork #GardenTools #HomeImprovement #HowTo #lawncaretips

Our DeWalt® DCST922P1 14” cordless string trimmer came with the DW01DT995 QuickLoad™ string trimmer bump head installed. Here’s how to quickly reload it and keep it in good shape!

#DeWaltTrimmer #QuickLoad #StringTrimmer #TrimmerHeadReload #DIYLawnCare #DeWaltTools #YardWorkTips #BumpFeedTrimmer #CordlessTrimmer #TrimmerLineReload #DCST922P1 #ToolTips #DIYLawnMaintenance #LawnTools #DirtFarmerJay

Each season, it takes a moment to remember how to load the QuickLoad­­™ the bump-feed trimmer head with 0.080” (2.0 mm) trimmer string, but it is intuitive and there are marks on the head to give me clues of what to do. In no time at all, I’m a pro again and can reload the head in a minute.

To keep reloads speedy and convenient, keep 20’ (6 m) precut coils of the trimmer string ready to go.

Let’s get to it! The steps to reload the head are:

1. Remove the battery to eliminate the possibility of starting the trimmer.
2. Make a 20' (6m) coil of 0.080" (2.0 mm) trimmer line or better, use the one you have on hand.
3. Align the metal housing eyelets with the arrows on the spool grip cover.
4. Thread one end of the trimmer line through an eyelet. Push the line through to and out the second eyelet.
5. Pull the line through the spool until there are equal lengths of string on each side of the spool housing.
6. Grab and hold the spool cap with one hand. With your other hand, wind the string onto the spool by rotating the spool grip cover counterclockwise. Continue winding until 5" (130 mm) of string remains on each side of the spool housing.

If there is a short section of string in the head, or an obstruction needs to be cleared, the tabs on the side of the spool cap can be depressed and the head disassembled, cleared and reassembled. Then a fresh line can be installed.

We use a light spray of WD-40 or spray lubricant in the interior of the head just to keep things running smoothly.

Should you need a replacement head (DeWalt® DW01DT995), you can get it here:

https://www.amazon.com/dp/B07QY9BS2C

The replacement head fits these DeWalt® string trimmers:

DCST920
DCST922
DCST925
DCST970
DCST972
DCST991

If you’d like to see our setup and initial review of the DeWalt® DCST922P1 14” cordless string trimmer kit, visit:

   • DeWALT 14” Cordless Trimmer Review  

We’ve had the tool for 5 years now, how has it held up? To see, check this out:

COMING SOON!

JUST DO IT YOURSELF!