RC switch for lights from Banggood - Easy to use

This is Simple RC switch from Banggood
https://www.banggood.com/Two-Channels...
Switch have 2 channels and it's controlled by one switch.
It's powered from receiver so it's mostly 5v
To connect LED's You will need resistor for each led with resistance from about 220 Ohm up. Putting resistor with more ohms will make LED not so bright (more realistic)
Minimum resistance it's about 120 Ohm but more safe is to use 220 Ohm as minimum.
Resistance can be calculated here:
http://ledcalc.com/
I also show basic connections with ESC, servo and switch so people that are new in RC will know how to connect it

Links:
FlySky FS-i6 Transmitter + receiver
https://www.banggood.com/FlySky-FS-i6...

MG90S servo (same as in movie but with metal gears)
https://www.banggood.com/Tower-Pro-MG...

20A/30A ESC (most popular with brake switch I got one on video instead but it's the same but without brake switch)
https://www.banggood.com/2030A-Mini-B...

Music:
00:70 - 06:16
Lost Ashes - Seity
  / lost-ashes-seity  

06:16 - 08:49
Labisch - Passion
  / labisch-passion-creative-commons