Скачать или смотреть Disassemble/Disassembly Demonstration for Shop Vac Model E87S450, 4 Gallon, 4.5 HP

o This is a Disassemble/Disassembly Demonstration for Wet/Dry Shop Vac Model, E87S450, 4 Gallon, 4.5 HP and this demonstration may be helpful to disassemble, analyze, diagnose, and repair Shop Vacs which are similar models - as it shows how to gain access to the Shop Vac Power Unit Assembly Blower Fan, Switch, and Motor. The equipment that I used for this demonstration are: an Impact Driver, a Bit Extension, a Torx 25 Bit, a small bungee cord, rubber gloves, and a small container to hold the screws.

o Thanks for watching and please leave a like 👍👍👍 and subscribe ✅🆗✅👌🔔to show support for future demonstrations and videos if you found this demonstration to be useful and/or helpful.

o This demonstration is divided into the following time stamped chapters:

00:00 Introduction

00:24 Disclaimer

00:30 Equipment List

00:51 Power Tool Warning

01:08 Step 1 Unplug Shop Vac and Bind Cord With Bungee Cord

01:23 Step 2 Remove Bottom Tank Assembly

02:08 Step 3 Remove Screws from Lid Cage and Latch Assembly

02:27 Step 4 Remove Lid Cage Latch Assembly and Ball Float

03:06 Step 5 Remove Screws from Power Unit Assembly Cover

03:24 Step 6 Remove Power Unit Assembly Cover

03:55 Step 7 Remove Blower Fan Screws

04:20 Step 8 Separate Motor Cover Assembly and Power Unit Assembly

04:53 Step 9 Remove Top of Power Unit Assembly

05:12 Bonus Keep Power Unit Assembly Intact