How to Replace Rear Brake Rotor Backing Plate 1999-07 Chevy Silverado

Buy Now!
New Brake Rotor Backing Plate from 1AAuto.com http://1aau.to/ia/1ABMX00082

The brake rotor backing plate protects the inner brake rotor and brake assembly from road debris, dust and water, to keep your brakes stopping effectively and safely. If the backing plate on your vehicle is broken, bent, or missing, braking safety could be affected. This video shows you how to install a new rear brake backing plate on your 1999-2007 Chevy Silverado.

• Check here for more videos on the 1999-2007 Chevy Silverado:    • Chevy Silverado 1999-2006 1st Gen  

This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Pry Bar http://1aau.to/oa/1AXAA00020
• 18mm Wrench
• 13mm Socket http://1aau.to/oa/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 8mm Socket http://1aau.to/oa/1AXAA00017
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• 3/8 Inch Socket http://1aau.to/oa/1AXAA00016
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Gear Oil
• Liquid Thread Locker
• Paper Towels http://1aau.to/oa/1AXSS00035
• RTV
• Rust Penetrant
• Drain Pan http://1aau.to/oa/1AXAA00320
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Razor Blade / Gasket Scraper http://1aau.to/oa/1AXAA00280
• Wheel Chocks
• Wire Brush http://1aau.to/oa/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 1999-2007 1st Gen:    • Chevy Silverado 1999-2006 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.