Rear signals upgrade to LEDs (and resistors) 2011 SAAB 95 NG

rear signal (and brake) bulb is a halogen H21w which gets hot and melts the housing (socket). Replaced with LEDs which run cool, but give CAN bus errors in the dashboard (burnt bulb warning) and also hyper flash (black 3 times at regular speed and then start to rapidly blink) - even if the LEDs promise error free operation, the SAAB knows. So you add a 6Ω resistor IN PARALLEL to fool the car.

There are other beautiful videos on how to do this. I am sharing my own experience with the parts that I ordered while trying to make a shorter video that's quicker to watch.
Remember, the wires you want to connect the resistor to are blue/white and black on left, blue/purple and black on right side (for US car)

https://www.amazon.com/gp/product/B00...

https://www.amazon.com/gp/product/B08...