I got faster internet for only $50 from AT&T Gigabit Fiber using an SFP+ module installation

A user, Cats, informed me of a SFP+ Module that would work with the Ubiquiti UDM Pro. This module allows for 1G, 2.5G, 5G, and 10G modes. So by connecting my UDM Pro to the 5Gb Ethernet port on the BGW 320, I was able to overprovision my network and get more bandwidth from my ISP.

👇 Get yours here 👇
https://amzn.to/3mBiDLC

🤩 Support the channel 🤩
https://www.amazon.com/shop/spxlabs
https://spxlabs.com/links
https://spxlabs.com/shop
http://ts.la/stefano66335

Visit 🥱
https://spxlabs.com

Chat 🥳
  / spxlabs  
  / discord  


@Ubiquiti #homelab #networking #homenetwork

WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.

CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports)

PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az; Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery

HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing;Less than 2.5W Power Consumption;RoHS compliant (lead free)

SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support.

Features
◆ Supports Links up to 30m using Cat 6A/7 or Better Cable
◆ SFF-8431 and SFF-8432 MSA Compliant
◆ IEEE 802.3az and 802.3an Compliant
◆ IEEE 802.3bz for 5G&2.5G BASE-T
◆ Hot-pluggable SFP+ footprint
◆ TX Disable and RX Los function
◆ Fully metallic enclosure for Low EMI Emissions
◆ +3.3V single power supply
◆ Low Power Consumption (2.5W MAX @ 30m)
◆ Compact RJ-45 connector assembly
◆ Access to physical layer IC via 2-wire serial bus
◆ XFI/5GBASE-R/2500BASE-X/SGMII, SGMII Auto-Negotiation On
◆ Auto-negotiates with other 10GBase-T PHYs
◆ Supports 100/1000Base-T using Cat 5e cable or better
◆ MDI/MDIX Crossover
◆ Multiple Loopback Modes for Testing and Troubleshooting
◆ Built-in Cable Monitoring and Link Diagnostic
◆ Unshielded and Shielded cable support
◆ Operating case temperature range of 0°C to +70°C

Applications
◆ 10 Gigabit Ethernet over Cat 6A cable
◆ 5 Gigabit Ethernet over Cat 6A cable
◆ 2.5 Gigabit Ethernet over Cat 6A cable
◆ 1.25 Gigabit Ethernet over Cat 5e cable