Leica UHF Radio Video 1 of 5: Cs15 & GS14 RTK UHF Base setup with Satel EZPRO 35 watt UHF radio

00:00 Overview of the Older CS15 Data collector which sensors are compatible. This is a great option to have a "designated" base and controller for UHF radio setup to work in areas outside of Network, or in areas where cell coverage is weak, or increase accuracy is required- can can use older CS15 and older Sensor to accomplish this will new GS16-18 Radio rovers

Range of Satel EZ Pro 25 watt is approx. 3-6 miles in Houston

02:10 CS15 link to sensors GS10-14-15 and firmware compatibility

03:35 Schematic of GS14 Base setup with Satel EZ Pro 35 watt radio- this radio with elevated antenna should push out 3-5 miles -increase range for RTK radio

04:45 Satel EZ pro Device settings for CS15

05:45 Satel 4 PRO Device settings for CS15

06:25 Collect static Data to SD on GS Base senor

07:45 CS15 Settings : Setup of Jobs

08:15 Switch to Base mode on CS15

08:35 Bluetooth CS15 to GS14 sensor

09:10 GPS Settings -cutoff angle

09:30 Radio settings on cs15 configuration for Satel EZ Pro

10:30 Radio settings on cs15 configuration for Satel 4 Pro

12:00 Setup on "Any point" +/- 10-15 feet

12:30 Setup over "known Point" if using a set control point

14:20 View RTK data coming in on GS18 CS20 rover screen

15:20 How to change radio channel on Base radio via CS15 (if getting "stepped on"

15:50 How to change channel on GS18 CS20 Rover to match base radio

16:30 Physical setup of base radio Antenna mast

17:30 GEV274 y cable :Satel radio & 35 amp battery via SAE clips (Qty 2)

18:50 Check voltage reading on radio to ensure battery is good

19:45 Change radio channel on Satel radio

20:30 Check Data compatibility mode on Satel base radio

20:45 Check the FEC setting on EZ pro radio