K 10 Super Scale Build #1 installing the V8 and Trans

Ok getting the RC4WD V8 and R4 trans with T-Case mounted up in the Super Scaled K-10. Stock motor mnts do work but you have to use the lower hole set on the engine block aligned with the top holes on the stock mounts. Trans mount that comes with the R4 trans with T-case will not work. The work around for that is simply using the shield as the mount. I printed a small cradle that bolts to the T- case and used self tappers to secure it to the shield. Other than that I did some wire routing to route the front lights harness thru the cab and behind the dash and then to the fuel where the reciever will be located.

Link to the website https://www.ultimatescalerc.com/
Link for ordering the K-10 Super Scale Kit: https://www.ultimatescalerc.com/k-10s...

Scale Builders Comunity Forum: https://www.ultimatescalerc.com/forum

Like us on facebook: https://www.facebook.com/profile.php?...