How to Replace Upper Control Arms 2009-2014 Ford F-150

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ic/1ASFU00077

This video shows you how to install new upper control arms from TRQ on your 2009-2014 Ford F-150. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150

Tools you will need:
• Pry Bar http://1aau.to/oUo/1AXAA00020
• 21mm wrench
• 10mm Socket http://1aau.to/obc5/1AXAA00017
• 13mm Socket http://1aau.to/obw2/1AXAA00015
• 15mm Deep Socket http://1aau.to/obw2/1AXAA00015
• 15mm Socket http://1aau.to/obw2/1AXAA00015
• 18mm Socket http://1aau.to/oaig/1AXAA00043
• 21mm Socket http://1aau.to/oaig/1AXAA00043
• 27mm socket http://1aau.to/oY/1AAST00007
• 30mm Socket
• 8mm Socket http://1aau.to/obc5/1AXAA00017
• Trim Tool Set http://1aau.to/oadk/1AXXX00006
• Locking Pliers http://1aau.to/ok3/1AXAA00139
• Torque Wrench http://1aau.to/oaGx/1AXAA00044
• Bungee Cord
• Copper Anti-Seize
• Gloves http://1aau.to/oaaN/1AXSS00048
• Safety Glasses http://1aau.to/o3Z/1AXAA00343
• Floor Jack http://1aau.to/o6F/1AXAA00068
• Hammer http://1aau.to/oUx/1AXAA00091
• Pole Jack
• Rubber Mallet http://1aau.to/ogU/1AXAA00413
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.